How To Use The Channel Configuration Editor - HP 81200 User Manual

How to Combine Generator Channels
HP 81200 Data Generator/Analyzer Platform User Guide, Revision 2.1

How to Use the Channel Configuration Editor

The Channel Configuration Editor comes up with the following window:
Figure 55 Channel Configuration Editor
You can change the property of channel 2 and/or channel 4.
To add channels 1 and 2 and channels 3 and 4 in digital mode:
1 Activate D2 for channel 1.
2 Activate D2 for channel 4.
Figure 56 Channel Configuration Editor—Two Added Channels
Note that the connectors of channel 1 and channel 3 are no longer
available.
To combine all four channels:
1 Activate D4 for channel 4.
Setting Up Ports and Channels
125