Table of Contents
Advertisement
Document revision history
Document revision history
Important changes to this document are listed below. Minor changes such as typographical or formatting errors are not
listed.
Date
Topic
2/7/17
To wire the controller to the BACnet
network
Wiring for communications
Sequence of operation - Linkage
modes and operation
Specifications
Cover
What is the VVT Bypass Controller?
2/22/16
Start-up
12/7/15
What is a VVT Bypass Controller?
To mount the controller
To clean the airflow sensor orifice
2/12/15
To mount the controller
Variable frequency drive
Bypass damper
6/19/14
Restore factory defaults
* For internal use only
VVT Bypass Controller
Installation and Start-up Guide
Change description
Added BACnet ARC156 connection information
Changed from Wiring the VVT Bypass Controller to the MS/TP
network
Clarified reason and method for generating a particular mode.
Evacuation/Shutdown changed to Evacuation.
Added ARC156.
Updated picture
Added USB Link wiring caution.
Removed all references to
BACview
Note on metric version.
Corrected the nut size to M5.
New topic
Corrected the term "duct static pickup" to "duct static pressure
probe". Added the part number.
Added information on using the Factory Defaults Shorts pins
Carrier Proprietary and Confidential
34
Code*
C-D
C-D
C-AE-WB-E
C-D
C-D
C-TS-RD-E-JH
C-D
C-AE-WB-E
CA-AE-WB-E-RE
AC-TS-TS-E
C-TS-JN-E
C-D-LJ-E-RD
CARRIER CORPORATION ©2017
All rights reserved
Advertisement
Table of Contents
