NOTE Maintain polarity if using the same power supply for more than one actuator.
Wiring and mounting the Equipment Touch
CAUTION If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
See the Equipment Touch Installation and Setup Guide for more details.
Mounting
The Equipment Touch must be mounted within the building interior. You can mount the Equipment Touch:
•
In a panel with the controller or on the panel door
•
On a wall up to 500 feet from the controller
VVT Bypass Controller
Installation and Start-up Guide
Carrier Proprietary and Confidential
15
Installing the VVT Bypass Controller
CARRIER CORPORATION ©2017
All rights reserved