Remote Ts-1000 Oam Setup - Planet FT-902S15 User Manual

4.7.2 Remote TS-1000 OAM Setup

The Remote TS-1000 OAM Setup is an advanced remote device monitor feature that allows you to Remote monitor and
automatic notify status indication.
Remote monitor
1. User instructs center Media Converter to issue a status notification request frame defined in TS-1000 to get status of
terminal Media Converter.
2. Terminal Media Converter receives the status notification request frame and sends out status response frame, which
carries its current status.
Autonomous notification
1. Terminal Media Converter notifies the center Media Converter autonomously with a status notification indication, if any
change occurs in the status monitored internally by the terminal Media Converter.
1. Center Media Converter if support Option A, notifies the terminal Media Converter autonomously with a status
notification indication, if any change occurs in the status monitored internally by the center Media Converter.
This function provides Remote TS-1000 OAM Setup of Managed Media Converter. Press the "Apply" button to save the
current configuration of Managed Media Converter. The screen in
Figure 4-36 GT-80X Remote TS-1000 OAM Setup Web Page screen
Figure 4-36 & 4-37
-42-
appears.