Example Of Operation - JUKI AW-3S Instruction Manual

3-12. Example of operation

This clause gives an example of how to actually operate the device.
(1) In the case both of the two bobbins have been taken out of the device or both of the two
bobbins are empty
A
<Data input screen>
B
<AW setting screen>
H
<Thread unraveling
strength setting screen>
1) Turn the power to the device.
2) Set the bobbin-thread winding length to be wound on a bobbin.
Press
C
E
<Bobbin-thread winding
length setting screen>
3) Setting the thread unraveling conditions
Press
0: Without thread unraveling function
1: Min. to 5: Max.
Then, specify the thread unraveling conditions using the +/-
button or the numeric keypad H.
After the entry of bobbin-thread winding length, press
G
– 27 –
A on the data input screen.
C on the AW setting
Press
screen.
Set the bobbin-thread winding length us-
ing the +/- button or the numeric keypad
F on the bobbin-thread winding length
setting screen.
F
After the entry of bobbin-thread winding
length, press
D
E on the AW setting screen.
D .
G.