3-11. Setting the AW number-of-stitches input mode, AW operation
mode and remaining-thread allowance length
A
<Data input screen>
Ⓐ
Ⓒ
<AW setting screen, first page>
Ⓖ
<AW setting screen, second page>
A is pressed on the data input screen, the AW setting
When
screen is displayed.
When one of the following buttons is pressed on the AW setting
screen, the corresponding setting of the AW can be carried out.
Ⓐ : Bobbin changing method setting button
Ⓑ
Ⓑ : Bobbin-thread winding length setting button
Ⓒ : Remaining-thread allowance length selection button
Ⓓ
Ⓓ : Thread unraveling strength setting button
Ⓔ : Bobbin thread end length adjustment button
Ⓕ : Remaining thread removal motor speed setting button
Ⓖ : Remaining thread removal air changeover setting button
Detailed explanation will be given from the next page.
– 20 –