Maintenance; Attaching / Removing The Cover - JUKI AW-3S Instruction Manual

4. MAINTENANCE

4-1. Attaching / removing the cover

WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
Remove front cover ❶ from the device before carrying out cleaning, etc.
❶
❸
Loosen four setscrews ❷ on the right and left side faces of the device.
2)
Slightly shift the cover ❶ upward, then carefully draw it toward you.
3)
Install the cover ❶ reversing the removal procedure.
When you want to carry out sewing, it is necessary to attach cover ❶ for the sake of safe-
ty.
Remove sensor cover connector ❶ .
1)
❷
– 38 –
❸