Step 4: Connecting The Antenna (Aerial) - Sony HT-CT500 Operating Instructions (HT-CT500) Operating Instructions Manual

Step 4: Connecting the antenna (aerial)

Connecting the AM loop antenna (aerial)
The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle
or roll up the antenna (aerial).
1
Remove only the loop part from the plastic stand.
2
Set up the AM loop antenna (aerial).
3
Connect the cords to the AM antenna (aerial) terminals.
While pushing down the terminal clamp, insert the (*) part of the cords.
The cords can be connected to either terminal.
Rear of the
subwoofer
DVD IN
DC 5V ONLY FOR
0.7A MAX SS-CT500
PORT
Note
• Do not place the AM loop antenna (aerial) near the system or other AV component, as noise may result.
Tip
• Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
4
Make sure the AM loop antenna (aerial) is connected firmly by pulling softly on the cord.
AM
FM
75 COAXIAL
EZW-T100 ANTENNA
SAT/CATV IN TV OUT
HDMI
OPTICAL COAXIAL
TV IN VIDEO 2 IN VIDEO 3 IN VIDEO 3 IN
DIGITAL
VIDEO IN COMPONENT VIDEO IN
Y
ASSIGNABLE
P /
L L
B
C
B
P /
R
C
R
R R
AUDIO IN AUDIO IN
REMOTE
TV VIDEO 1 VIDEO 2 VIDEO 3
CTRL
*
continued
37
US