Connecting The Fm Wire Antenna (Aerial) - Sony DAV-F300 User Manual

To change the color system (PAL or NTSC)
1
Turn on your TV and select the video input.
2
Press ?/1 to turn on the system.
3
Press FUNCTION repeatedly or DVD/CD to switch the function to DVD/CD.
Playback starts automatically if a disc with auto playback function is loaded. Press x twice to stop
playback.
4
Press SETUP in stop mode.
etup Menu appears.
The S
5
Press repeatedly to select "Preference Page", then press
C/c
6
Press repeatedly to select "TV Type", then press
X/x
7
Press repeatedly to select PAL/Multi/NTSC from the displayed list, then press
X/x
8
Press SETUP to turn off the Setup Menu.
Notes
• A disturbance on the TV screen may be present for a moment after changing the color system as described above.
• HDMI cannot the color system setting.
• If you find the picture image may be distorted, you can operate as below to default color system setting:
– Press Z to take out the disc (in no disc mode).
– Press DISPLAY.
– Press .
.

Connecting the FM wire antenna (aerial)

FM wire antenna (aerial)
(supplied)
L 75
CO AX IA
N A
A N T E N
Tip
• If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the control unit to an outdoor
FM antenna (aerial) as shown below.
Outdoor FM antenna (aerial)
12 GB
.
.
Connector panel of the control unit
FM
COAXIAL 75
ANTENNA
.
Connector panel
of the control unit