Precautions - Sony HT-CT500 Operating Instructions (HT-CT500) Operating Instructions Manual

Home theater systems: home theatre system
Hide thumbs Also See for HT-CT500 Operating Instructions (HT-CT500):
Table of Contents

Advertisement

Available languages

Available languages

8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
ENERGY STAR
registered mark.
As an ENERGY STAR
Sony Corporation has determined that
this product meets the ENERGY
®
STAR
guidelines for energy
efficiency.
On safety
• Should any solid object or liquid fall into the system,
• Do not climb on the subwoofer, as you may fall down
On power sources
• Before operating the system, check that the operating
• If you are not going to use the system for a long time,
• One blade of the plug is wider than the other for the
• AC power cord (mains lead) must be changed only at
• The unit is not disconnected from the mains as long
On heat buildup
Although the system heats up during operation, this is
not a malfunction. If you continuously use this system
at a large volume, the system temperature of the back
and bottom rises considerably. To avoid burning
yourself, do not touch the system.
On placement
• Place the system in a location with adequate
®
is a U.S.
®
partner,
• Do not place the system near heat sources, or in a
• Do not place anything at the rear of the subwoofer
• Do not cover the grill of the subwoofer.
• Do not place the system near equipment such as a TV,

Precautions

unplug the system and have it checked by qualified
personnel before operating it any further.
and injure yourself, or system damage may result.
voltage is identical to your local power supply. The
operating voltage is indicated on the nameplate at the
rear of the subwoofer.
be sure to disconnect the system from the wall outlet
(mains). To disconnect the AC power cord (mains
lead), grasp the plug itself; never pull the cord.
purpose of safety and will fit into the wall outlet
(mains) only one way. If you are unable to insert the
plug fully into the outlet, contact your dealer.
the qualified service shop.
as it is connected to the AC outlet, even if the unit
itself has been turned off.
ventilation to prevent heat buildup and prolong the
life of the system.
place subject to direct sunlight, excessive dust, or
mechanical shock.
that might block the ventilation holes and cause
malfunctions.
VCR, or tape deck. (If the system is being used in
combination with a TV, VCR, or tape deck, and is
placed too close to that equipment, noise may result,
and picture quality may suffer. This is especially
US
GB
continued
3
US

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sa-wct500Ss-ct500

Table of Contents