Changing The Input Button Assignments Of The Remote - Sony HT-CT500 Operating Instructions (HT-CT500) Operating Instructions Manual

Changing the input button
assignments of the remote
You can change the factory settings of the input
buttons to suit the components in your system.
For example, if you connect a Blu-ray Disc
player to the DVD jack on the system, you can
set the DVD button on this remote to control the
Blu-ray Disc player.
You cannot assign any component other than a
TV to the TV (white) button of the remote.
TV
TV INPUT
(white)
BD DVD
VIDEO1 VIDEO2 VIDEO3
Number
buttons
/CLEAR
YELLOW BLUE
DISPLAY
HOME
RETURN/
EXIT MENU
PRESET REPLAY
TUNING
TV
TV
(yellow)
TV VOL
VOLUME
MUTING
TV VOL
VOLUME –
1
Press and hold the input button whose
assignment you want to change, and
press TV (yellow) at the same time.
The TV (yellow) button flashes red every
other second, and the remote enters the
assignment mode.
TV ?/1
AV ?/1
TV
AV
?/1
SYSTEM STANDBY
Input
SAT/CATV DMPORT
buttons
TUNER/
BAND
ENT
ENT
RED GREEN
GUI MENU
TOOLS/
OPTIONS
ADVANCE PRESET
TUNING
TV CH
CHANNEL
Note
• The remote exits the assignment mode if no
button is pressed within 60 seconds.
2
Press the number buttons to enter the
three digit numeric code (or one of the
codes if more than one code are
available) corresponding to the
component you want to assign, then
press ENT.
For details on numeric codes, see "Numeric
codes of controllable components"
(page 76).
Once the numeric code is verified, the TV
(yellow) button flashes twice and then the
remote exits the assignment mode.
If the numeric code is not verified, the TV
(yellow) button flashes five times and then
the remote exits the assignment mode.
3
Repeat steps 1 to 2 to assign other
components.
If programming is unsuccessful,
check the following:
If the indicator does not light up in step 1, the
batteries may be weak. If this is the case, replace
both batteries.
To clear all remote button
assignments
Press and hold TV VOL VOLUME –,
AV ?/1 in this order. The remote is reset to its
factory settings.
When the clearance is completed, the TV
(yellow) button flashes three times.
Numeric codes corresponding to
the component and maker
Use "Numeric codes of controllable
components" below to control non-Sony
components and Sony components that the
remote is normally unable to control. Since the
remote signal that a component accepts may
differ depending on the component's model and
year, more than one numeric code may be
assigned to a component. If you fail to program
your remote using one of the codes, try using
others.
?/1 , and
continued
75
US