Commissioning The System - Viessmann VITOCAL 222-S Installation And Service Instructions Manual

Commissioning, inspection, maintenance

Commissioning the system

Commissioning (configuration, parameter settings and
function check) can be carried out with or without the
commissioning wizard (see following chapter and serv-
ice instructions for the heat pump control unit).
Commissioning with the commissioning assistant
The commissioning assistant automatically guides you
through all the menus where settings have to be made.
For this, "Coding level 1" is automatically active.
!
Please note
Incorrect operation at "Coding level 1" may
result in damage to the appliance and the heat-
ing system.
Observe the service instructions for the
"Vitotronic 200", otherwise the appliance war-
ranty will be void.
58
Note
The type and extent of the parameters depend on the
appliance type, on the selected system scheme and
the accessories employed.
Switch ON the ON/OFF switch on the control unit.
The prompt "Start commissioning?" appears auto-
■
matically on commissioning.
Note
The commissioning assistant can also be started
manually:
To do this, press and hold
control unit (progress bar visible).
When the unit is first commissioned, the display is in
■
German.
Sprache
Deutsch
Bulgarski
Cesky
Dansk
Wählen mit
Fig. 52
Manually switching some appliance components dur-
■
ing commissioning enables the control unit to display
messages. These messages are not appliance
faults.
when switching on the
DE
ê
ç
BG
ê
CZ
ê
DK
ê
(