Commissioning The System - Viessmann VITOCAL 300-G PRO SPS Installation And Service Instructions Manual

Commissioning, inspection, maintenance
Further details regarding the individual steps

Commissioning the system

Commissioning (configuration and
parameter settings) is carried out with
the commissioning wizard (see following
chapter and service instructions for the
"Vitotronic SPS heat pump control
unit").
Configuration procedure
The configuration procedure is described on the following pages along with screen-
shots.
66
(cont.)
Note
The type and extent of the parameters
depend on the heat pump type, on the
selected system scheme and the acces-
sories employed.
Observe the instructions in the separate
service instructions of the Vitotronic SPS
heat pump control unit, otherwise the
appliance will no longer be under war-
ranty.