Carrier WSHP Open v3 Integration Manual page 14

Communications wiring
Type Touch for the password and click Done.
2
On the Properties Menu screen, scroll to the bottom of the list and click ET System.
3
On the ET System screen, click Setup.
4
On the Setup screen, click Module Setup.
5
On the Module Setup screen, click Communication.
6
On the Communication screen, edit the fields as needed:
Click the property box next to BACnet Device Instance, type the new number, and click Done.
7
Click the property box next to Max Masters and/or Max Info Frames, type a new value (1-127), and click
8
Done.
Click Save.
9
WSHP Open v3
Integration Guide
10
CARRIER CORPORATION ©2021
All rights reserved