Carrier WSHP Open v3 Integration Manual page 37

If Run LED shows...
2 flashes per second
2 flashes per second
5 flashes per second
7 flashes per second
14 flashes per second
On
WSHP Open v3
Integration Guide
And Error LED shows...
On
On
Off
7 flashes per second,
Run
alternating with LED
14 flashes per second, alternating with
Run
LED
On
33
Troubleshooting the WSHP Open
Status is..
Two or more devices on this network
have the same network address
Firmware halted after frequent
system errors or control programs
halted
Firmware transfer in progress, Boot is
running
Ten second recovery period after
brownout
Brownout
Failure. Try the following solutions:
•
Turn the WSHP Open off,
then on.
•
Replace the WSHP Open.
CARRIER CORPORATION ©2021
All rights reserved