Omron H7CX Series Manual page 30

H7CX
Dimensions with Flush Mounting Adapter
Screw-terminal Models with External Power Supplies
(Provided with Adapter and Waterproof Packing)
œ œ
H7CX-A H7CX-AW
œ œ
H7CX-AS H7CX-AWS
œ œ
H7CX-A4 H7CX-A4W
œ œ
H7CX-A4S H7CX-AWD1
œ
H7CX-AWSD1
Screw-terminal Models without External Power Supplies
(Provided with Adapter and Waterproof Packing)
œ œ
H7CX-AD H7CX-AWSD
œ œ
H7CX-ASD H7CX-A4WSD
œ
H7CX-A4D
œ
H7CX-A4SD
11-pin Socket Models
(Adapter and Waterproof Packing Ordered Separately)
œ œ
H7CX-A11 H7CX-A114
œ œ
H7CX-A11S H7CX-A114S
œ œ
H7CX-A11D1 H7CX-A114D1
œ
H7CX-A11SD1
Dimensions with Front Connecting Socket
H7CX
-A11
109.7
112
P2CF-11
Note: These dimensions vary with the kind of DIN track (reference value).
œ
H7CX-AU
œ
H7CX-AUD1
œ
H7CX-AUSD1
Y92S-29 (provided)
Waterproof Packing
58 (51)
48 7.5
Y92S-29 (provided)
Waterproof Packing
58 (51)
48 7.5
Y92S-29 (order separately)
Waterproof Packing
58 (51)
48 7.5
Panel
Y92F-30 (provided)
Flush Mounting Adapter
98.5
Panel
Y92F-30 (provided)
Flush Mounting Adapter
62.5
Panel
Y92F-30 (order separately)
Flush Mounting Adapter
98.7
Panel Cutouts
Panel cutouts are
as shown below.
(according to DIN43700).
60 min.
+0.6
45
−0
+0.6
45
−0
60 min.
15 min.
Note 1. The mounting panel thickness
should be 1 to 5 mm.
2. To allow easier operability, it is
recommended that Adapters are
mounted so that the gap between
sides with hooks is at least 15 mm
(i.e., so that the panel cutout interval
is at least 60 mm).
3. It is possible to mount counters
side by side, but only in the
direction without the hooks.
If they are mounted side-by-side,
water-resistant specifications
cannot be ensured.
n side by side mounting
A
A = (48n − 2.5) +1
0
With Y92A-48F1 attached.
A = {48n−2.5 + (n−1) x 4}
With Y92A-48 attached.
+1
A = (51n−5.5)
0
P3GA-11
(order separately)
Back Connecting
Socket
H7CX
0
33