Omron H7CX Series Manual page 25

H7CX (Tachometer Function)
.323
Output Allocation ( )
When using H7CX-AU@ models as 2-stage counter, each output
can be flexibly allocated to either stage 1 or 2.
Transistor output placed for SV1 and contact output for SV2 or
vice verce, as in the following table.
H7CX-AU/-AUD1
OUT1
.%%
Transistor (12-13)
.-
Contact (3, 4, 5)
H7CX-AUSD1
OUT1
.%%
Transistor (12-13)
.-
Transistor with diode
(3, 4, 5)
*7/3
Key Protect Level ( )
Set the key protect level.
When the key-protect switch in set to ON, it is possible to prevent setting errors by prohibiting the use of certain operation keys by specify-
ing the key protect level (KP-1 to KP-5). The key protect indicator is lit while the key-protect switch is set to ON. Confirm the ON/OFF status
of the key-protect switch after the H7CX is mounted to the panel.
(See note)
OFF ON
Note: Factory-set to OFF
Key protect indicator
Level Meaning
KP-1 (default setting)
KP-2
KP-3
KP-4
KP-5
Note: Changing mode to configuration selection mode (
28
OUT2
Contact (3, 4, 5)
Transistor (12-13)
OUT2
Transistor with diode
(3, 4, 5)
Transistor (12-13)
Changing mode Switching display
(See note.) during operation
No Yes
No Yes
No Yes
No Yes
No No
+
MODE 1
H7CX (Tachometer Function)
Details
Reset key
Yes
No
Yes
No
No
1 s min.) or function setting mode (
Up/down key (Up key
for 6-digit models)
Yes
Yes
No
No
No
3 s min.).
MODE