Sym ALA125CC Manual page 64

14. STEERING/FRONT WHEEL/FRONT SHOCK ABSORBER
Align the flange part on the speedometer
gear with the slot of wheel hub, and then
install the brake disc (drum brake) or
speedometer gear box.
Caution
Contaminated brake lining will reduce
brake performance so the brake lining,
brake drum and disc must be free of
grease.
Place the front wheel between the front
shock absorbers.
Drum Brake
Align the brake panel slot with the stopper of
the shock absorber.
Disc Brake
Align the flange part on the speedometer
gear with the slot of shock absorber stopper.
Disc Brake
Install the front wheel axle from right shock
absorber side.
Install the wheel axle nut, and tighten it to
specified torque value.
Torque value: 11.0~13.0kgf-m
Connect the speedometer cable to the
speedometer gear box.
Drum Brake
Install the front wheel axle from right shock
absorber side.
Install the wheel axle nut, and tighten it to
specified torque value.
Torque value: 5.0~7.0kgf-m
Connect the speedometer cable and brake
cable to the brake panel.
14-8
DISC BRAKE
Gear box flange part
Wheel axle nut
Wheel axle nut
Brake cable
DRUM BRAKE
Stopper
Brake panel slot
Speedometer cable
Speedometer
cable
SYM