Maintenance Information - Sym ALA125CC Manual

13. BRAKE

MAINTENANCE INFORMATION

Precautions in Operation
Caution
Installing lining dusts may cause disorders of respiration system or cancer, therefore,
never use air hose or dry brush to clean brake parts. Use vacuum cleaner or other
authorized tool instead.
The brake caliper can be removed without removing the hydraulic system.
After the hydraulic system is removed, or the brake system is felt to be too soft, bleed the
hydraulic system.
While refilling brake fluid, care should be taken not to let the foreign material entering into
the brake system.
Do not spill brake fluid on the painted surfaces, plastic or rubber parts to avoid damage.
Check the operation of the brake system before you go.
Specifications
Item
The thickness of front brake
Front brake disc eccentricity
Master cylinder inner diameter
ID of front & rear brake drums
OD of front brake disc
Thickness of front disc brake
Thickness of front drum brake
Thickness of rear brake lining
Torque values
Bolt for front brake arm
Bolt for rear brake arm
Brake hose bolt
Bolt for brake caliper
Air-bleed valve
13-4
Standard
3.50
0.15
25.40
130.00
130.00
─
─
─
0.8~1.2kgf-m
0.8~1.2kgf-m
3.3~3.7kgf-m
3.1~3.5kgf-m
0.8~1.0kgf-m
Unit: mm
Limit
2.00
0.30
─
131.00
─
As brake ling mark
2mm or As brake ling mark
2mm or As brake ling mark
SYM