Starting Clutch - Sym ALA125CC Manual

SYM 10. A.C. GENERATOR/STARTING CLUTCH

STARTING CLUTCH

Starting Clutch Removal
Hold the starting driven gear with the
universal fixture.
Lock nut
Remove the 22mm anti-loosen lock nut and
gasket.
Special service tools:
Anti-loosen lock nut socket
Universal fixture.
Caution
Lock nut socket
The mounting nut is left-turn thread.
Starting driven gear
Remove the starting driven gear.
Starting clutch
Remove starting clutch, starting reduction
gear, and shaft.
Starting reduction gear
Starting driven gear
Starting Clutch Inspection
Install the starting clutch onto the starting
driven gear.
Hold the starting clutch and turn the starting
driven gear.
The starting driven gear should can be
turned in the motion of C.W. and can not be
turned in C.C.W.
10-5