Sym ALA125CC Manual page 23

SYM
Installation
Install the components in the reverse
procedures of removal.
Caution
Add adhesive onto the thread of hex
socket bolt.
Torque value: 1.0~1.4kgf-m
Starting clutch Installation
Install reduction gear shaft and reduction gear.
Install starting clutch.
Install the starting driven gear onto the
starting clutch.
Hold the starting driven gear with the
universal fixture.
Tighten the 22mm anti-loosen lock nut and
gasket.
Caution
Add engine oil onto the thread of lock nut.
Special service tools:
Anti-loosen lock nut socket
Universal fixture
Torque value: 9.0~10.0kgf-m
10. A.C. GENERATOR/STARTING CLUTCH
Hex socket
bolt
Clutch body
Starting clutch
Starting driven gear
Clutch cover
Lock nut
Plug
Spring
Roller
Oil pump cover
Lock nut socket
10-7