4. Install screws securing the tube caps to the tower frame using a Phillips screwdriver.
5. Press top cap down into the holes at the top of the tower frame.
6. Choose the appropriate language from the multilingual label sheet. Remove backing from multilingual label and
apply to the front cap.
Install Hole Plug
1. Remove shims.
2. Bolt unit to floor. See
Bolt to Floor Guide
Item
1
2
3
4
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
Item
1
2
Item
1
Page 24 of 34
Description
Top Cap
Tube Cap
Screw, 8 x ¾" Phillips
Grommet
Description
Multilingual Label
Front Cap
Description
Shim
Qty.
1
2
2
2
Qty.
1
1
Qty.
2