Life Fitness Axiom Series Assembly Instructions Manual page 16

7. Install screws, washers, and locknuts securing the roller pad bracket and foot support to the seat frame assembly
using an 8 mm Allen wrench and a 17 mm wrench.
NOTE: Check orientation of roller pad bracket and foot support. The roller pads and foot grips should face
towards the user and away from the tower.
Correct Orientation
Install Pads
1. Install screws and washers securing the seat pad to the seat frame assembly using an 8 mm Allen wrench.
2. Install holes plugs to the seat frame assembly using a rubber mallet.
Item
1
2
3
4
5
6
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
Item
1
2
3
4
Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).
Page 14 of 34
Description
Roller Pad Bracket
Foot Support
Screw, M10 x 1.5, 75 mm
Screw, M10 x 1.5, 80 mm
Washer, Flat 3/8"
Nut, M10 x 1.5, Hex Nylock
Incorrect Orientation
Description
Seat Pad
Screw, M10 x 1.5, 25 mm
Washer, Flat 3/8"
Hole Plug, 1"
Qty.
1
1
2
1
6
3
Qty.
1
3
3
3