Life Fitness Axiom Series Assembly Instructions Manual page 19

5. Starting at the top, press the shroud retainers into the rear shroud securing it to the tower frame.
6. NOTE: OPTIONAL: If your product does not include front shrouds, skip this step.
Install screws and washers securing the bottom cap to the bottom of the tower frame using an 8 mm Allen wrench.
7. Install hole plugs into holes in the bottom of the tower frame. Discard hole plugs if your product includes front
shrouds.
Item
1
2
Item
1
2
3
Tighten hardware to 8-10 ft-lb (10.8-13.5 Nm).
Item
1
Page 17 of 34
Description
Rear Shroud
Shroud Retainer
Description
Bottom Cap
Screw, M10 x 1.5, 20 mm
Washer, Flat 3/8"
Description
Hole Plug, 8.7 mm
Qty.
1
8
Qty.
1
2
2
Qty.
2