Life Fitness Axiom Series Assembly Instructions Manual page 23

17. Thread cable end through the jam nut and into the head plate bayonet. See
NOTE: Check proper thread engagement. To do so, attempt to pass a 7 mm Allen wrench through the portal in
the head plate bayonet. If it goes through, more threads are needed to meet the minimum requirement.
Correct Depth: Thread engagement exceeds minimum
18. Route 62" (1575mm) cable through the pulley bracket assembly and up through the floating pulley assembly.
NOTE: Make sure cable is correctly routed between pins and under pulley.
depth.
Page 21 of 34
Cable Handling Guide
Item Description
1 Cable, 112" (2855mm)
2 Nut, M16 Hex Jam
3 Head Plate Bayonet
Incorrect Depth: Thread engagement not deep
enough.
for details.
Qty.
1
1
1