Related Procedures For Installing And Removing Pcie Adapters; Avoiding Electric Shock - IBM Power System 9008-22L Manual

Figure 43. Closing the cable management arm
10. Close the rack door at the rear of the system.
11. Start the system. For instructions, see Starting a system (www.ibm.com/support/knowledgecenter/
POWER9/p9haj/crustartsys.htm).
12. Place the removed adapter in a safe place.
13. Turn off the identify LED. For instructions, see Deactivating an identify LED (www.ibm.com/support/
knowledgecenter/POWER9/p9haj/p9haj_turn_off_identify_led.htm).

Related procedures for installing and removing PCIe adapters

Find procedures that are related to installing and removing PCIe adapters.

Avoiding electric shock

Find information about precautions you should take to avoid electric shock when working on our around a
computer system.
DANGER: When working on or around the system, observe the following precautions:
Electrical voltage and current from power, telephone, and communication cables are hazardous.
To avoid a shock hazard:
62 Power Systems: PCIe adapters for the 9008-22L, 9009-22A, or 9223-22H