IBM Power System 9008-22L Manual page 66

DANGER: Multiple power cords. The product might be equipped with multiple AC power cords
or multiple DC power cables. To remove all hazardous voltages, disconnect all power cords
and power cables. (L003)
8. Label and disconnect all of the cables or transceivers that are attached to the adapter you plan to
remove.
Use a hook-and-loop fastener to hold the cables in place.
9. If the cable management arm is open, close it by completing the following steps:
a) Swing the cable management arm towards the server.
b) Insert the inner cable management arm tab (A) into the outer mounting bracket (B) until it clicks
into place as shown. The inner mounting bracket (C) is not used on the left side.
52 Power Systems: PCIe adapters for the 9008-22L, 9009-22A, or 9223-22H