IBM Power System 9008-22L Manual page 74

Figure 41. Releasing the cable management arm
b) Swing the cable management arm away from the system.
In the image, the inner cable management arm tab is shown on the left side as you are facing the
system from the rear. However, the cable management arm can also be installed so that the inner
cable management arm tab is on the right side of the system.
CAUTION: To avoid causing damage to the arm, open the cable management arm just long
enough to complete these repairs.
7. Choose from the following options:
• If you completed the procedure with the system power turned off, continue with step "8" on page
60.
• If you completed the procedure with the system power turned on, continue with step "9" on page
61.
8. Using your labels, reconnect the power cords (A) to the system unit.
Fasten the power cords to the system using the hook-and-loop fasteners (B) as shown in Figure 42
on page 61.
60 Power Systems: PCIe adapters for the 9008-22L, 9009-22A, or 9223-22H