Preparing the Recorder
Setting the Clock
You need to set the clock to use the alarm function or record the date and time.
Setting the clock after recharging the battery
When the clock is not set after you purchased the IC recorder and use it for the
first time, the "Set Date&Time" message appears and then the "Set
Date&Time?" confirmation message appears.
Press or to select "YES," and then press /ENT.
The clock setting window is displayed and the year section begins to flash.
Set year, month, day, hour and minute.
Press or to set the year, and then
press /ENT. Repeat this procedure to set
month, day, hour, and minute in sequence.
You can move the cursor back to an item by
pressing BACK/HOME.
When you set the minute and press /ENT,
the "Please Wait" animation appears and the
clock is set.
/ENT
BACK/HOME