Sony ICD-TX50 Operating Instructions Manual page 73



About the Menu Function
Sub menus
Recording Settings
Playback Settings
Menu items
Mic Sensitivity
LCF(Low Cut)
VOR
DPC(Speed Control)
Settings
(* : Initial setting)
Sets the microphone sensitivity.
High :
To record a sound far away from
the IC recorder or a low sound,
such as recording in a spacious
room.
Medium :
*
To record the sound of a normal
conversation or meeting, such as
recording in a meeting space or
during interview.
Low :
To record dictation with a
microphone in front of your
mouth, a sound near the IC
recorder, or a loud sound.
Sets the LCF (Low Cut Filter) function
to cut a low frequency to reduce the
noise from a projector, or the roaring
noise from wind; therefore you can
record a file more clearly.
ON*: The LCF function is activated.
OFF: The LCF function is canceled.
Sets the VOR (Voice Operated
Recording) function.
ON: Recording starts when the IC
recorder detects sound that
exceeds a specified level and
pauses when the detected sound
falls below a specified level. The
VOR function is activated when
 REC/PAUSE is pressed.
OFF*: The VOR function does not
work.
Sets the DPC (Digital Pitch Control)
function. You can adjust the playback
speed in a range from 0.50 times to
2.00 times normal. The file is played
back in natural tones by means of a
digital processing function.
ON(x n.nn):
A file is played back at the
specified speed (x n.nn: n=0 to
9) using the DPC function.
OFF*:
The DPC function does not
work.
Set Speed:
Specify the playback speed from
x0.5 to x2.00. (x0.70*)
See
page
—
—
43
48
Continued 