Recharging The Battery Using A Usb Ac Adaptor - Sony ICD-TX50 Operating Instructions Manual

1
1
Preparing the Recorder

Disconnect the IC recorder from your computer.
Follow the procedures below; otherwise, when the IC recorder contains
data files, the files may be damaged or become unplayable.
 Make sure that the operation indicator does not light.
 Perform the following operation on your computer.*
On the Windows taskbar at the bottom right of the desktop, left‑click the
following icon:

Left‑click "Eject IC RECORDER" (Windows 7), or "Safely remove USB
Mass Storage Device" (Windows XP, Windows Vista).
The icon and menu displayed can be different on different operating
systems. The icon may not always be displayed on the taskbar, depending
on your computer settings.
On a Macintosh screen, click the "IC RECORDER" or "MEMORY CARD"
ejection icon on the Finder side bar.
 Remove the USB connecting cable from your computer and the IC
recorder.
This is an approximation for the time it takes to charge from no remaining battery power to full
* 1
battery power at room temperature. It varies depending on the remaining power and the
condition of the battery.
For details on disconnecting the IC recorder from your computer, refer to the operating
*
2
instructions supplied with your computer.

Recharging the battery using a USB AC adaptor

You can also charge the battery by using a USB AC adaptor (not supplied)
(  p. 95).
2