Connecting The Ic Recorder To Your Computer - Sony ICD-TX50 Operating Instructions Manual

0
0
Utilizing Your Computer

Connecting the IC recorder to your computer

To exchange files between the IC recorder and your computer, connect the IC
recorder to your computer.

Connect the  (USB) connector of the IC recorder with the USB port
of your running computer with the supplied USB connecting cable
inserted into the connectors securely until each plug stops to the
end.

Make sure the IC recorder has been recognized properly.
On the Windows screen; open "My Computer" or "Computer, " and make
sure that "IC RECORDER" or "MEMORY CARD" has been recognized.
On the Macintosh screen; make sure that an "IC RECORDER" or
"MEMORY CARD" drive is displayed on the Finder side bar.
The IC recorder is recognized by the computer as soon as the connection is
made. While the IC recorder is connected to the computer, "Connecting" is
displayed in the display window of the IC recorder.
IC Recorder Your computer
To USB port of
your computer
USB connecting cable
To  (USB) connector