Setting The Clock - Sony HSR-1/1P Operating Instructions Manual

Setting the Clock

Set the time and date of the built-in clock.
The time and date are recorded as data on a tape, and
can be superimposed on the playback picture and used
for picture search.
3,4,6
1
S
MENU
LOCK REW PLAY F FWD
º · ‚
◊
ı ∫
CURSOR
REC FRAME STOP FRAME
SET/YES RESET/NO
® æ π ¶ √
7 5
1
Enter Menu mode by pressing the MENU key.
The Top menu appears on the monitor display.
SETUP MENU
IMAGE CONTROL MENU
INDICATION CONTROL MENU
REC FUNCTION MENU
FUNCTION CONTROL MENU
REMOTE CONTROL MENU
MAINTENANCE MENU
TIME ADJUST
MENU INITIALIZE
MENU GRADE
LANGUAGE
2
Highlight TIME ADJUST (or display "Time
Adjust" on the front panel) by pressing the V or v
key, then press the b key.
The unit enters Time adjustment mode, and the
column to be set flashes.
Monitor screen
TIME ADJUST
1 1 1999 4:09
DST SET : NO USE
ON 1ST-SUN 04 01:00
OFF LAST-SUN 10 01:00
SHIFT : Mm CHANGE : µ
DATA SET : SET
DIGITAL SURVELLANCE RECORDER HSR-1
†
REC DIGITAL
TIMELAPSE
EJECT
§
1 2 3 4
5 6 7 8
TIME
SEARCH
9 10
ALARM
SEARCH
CONTROL-S
: ENH
: ENG
PM
MENU : MENU
Character display
>1/1/1999
3
Set the date and time by advancing or retarding the
value with the V or v key or by directly entering a
value with the numeric keys, then press the b key
to the next column.
To switch between AM and PM, press the V or v
key.
4
Press the SET key at a time signal.
To automatically change the clock for the
daylight saving time
1
Highlight DST SET and select USE with the V or
v key, then press the b key.
2
On the ON line, select the week, day of the week
and time (24H format) to change the clock.
3
On the OFF line, select the week, day of the week
and time (24H format) to return the clock.
4
Press the SET key.
To cancel the setting
Press the MENU key in place of the SET key to leave
the menu mode.
The format for superimposing the date/time on the
playback picture can be set using the Indication
Control menu.
See "Indication Control Menu" on page 4-8.
Chapter 5 Connections and Preparations
5-5