Stopping The Recording; Other Operations - Sony ICD-TX50 Operating Instructions Manual



Recording Files

Stopping the recording


Press  STOP.
The "Please Wait" animation appears on the display and the operation
indicator flashes in orange. The IC recorder stops at the beginning of the
current recording file.
Note while accessing
The IC recorder is recording data and storing it on the memory media when
the "Please Wait" animation appears on the display, or the operation indicator
flashes in orange. While the IC recorder is accessing data, do not remove a
microSD card or press the RESET button. Also, do not disconnect or connect
the USB AC adaptor (not supplied) when you are using the USB AC adaptor.
Doing so may damage the data.

Other operations

To
pause recording
release pause and resume recording Press  REC/PAUSE again. Recording resumes
review the current recording
instantly
review during recording
* 1 hour after you pause recording, recording pause is automatically released and the IC recorder
enters the stop mode.

Hint
You can make new folders or erase unwanted folders using the supplied Sound Organizer
software (  p. 89).
Do this
*
Press  REC/PAUSE.
During recording pause, the recording indicator
and operation indicator flash in red and "
the counter indication begins to flash in the display
window.
from that point. (To stop recording after pausing
recording, press  STOP.)
Press /ENT. Recording stops and playback
starts from the beginning of the file just recorded.
Press and hold  during recording or recording
pause. Recording stops and you can search
backwards while listening to fast playback sound.
After you release , playback starts from that
point.
" and