Scene Mode Scheduler; Encoder Streams - Bosch DINION 5100i IR User Manual

DINION 5100i IR
A low (negative) value makes the picture less sharp. Increasing sharpness brings out more
detail. Extra sharpness can enhance the details of license plates, facial features and the edges
of certain surfaces but will increase bandwidth requirements.
4.4.9

Scene Mode Scheduler

The scene mode scheduler is used to determine which scene mode should be used during the
day and which scene mode should be used during the night.
1.
2.
3.
To set the Marked range as the single mode of the device, select the complete time range.
The text "Always" will appear after the Marked range menu.
For more information on the different scene modes, refer to the Scene Mode chapter.
Click Set to apply the changes.
4.4.10

Encoder Streams

When this menu is accessed while the device is recording, the following message appears at
the top of the page: "Recording is currently active. At 'Active profile' the stream profile used
for recording is displayed, and overrules the 'Non-recording profile'."
Stream prioritization
Select the stream that should not drop any frame.
Coding standard
Select the coding standard you want to use for the stream.
Active profile
Active profile shows the profile that is in use and can be set differently per stream
If no edge recording or VRM recording is active, the device switches to the Non-recording
profile. Please refer to section Non-recording profile.
Select one of the following profiles for each stream:
Profile number
Profile 1
Profile 2
Profile 3
Profile 4
Profile 5
Profile 6
Profile 7
Profile 8
Bosch Security Systems B.V.
Select the mode you wish to use during the day from Marked range drop-down box.
Select the mode you wish to use during the night from Unmarked range drop-down box.
Use the two slider buttons to set the Time ranges.
Description
For a high resolution image, the video bit rate and frame quality are
adjusted to ensure that the picture quality is the priority.
For a high resolution image, the video bit rate and frame quality are
adjusted to a median profile for everyday use.
For a high resolution image, the video bit rate and frame quality are
adjusted to ensure that the bit rate is the priority.
For a low resolution image, the video bit rate and frame quality are
adjusted to ensure that the picture quality is the priority.
For a low resolution image, the video bit rate and frame quality are
adjusted to a median profile for everyday use.
For a low resolution image, the video bit rate and frame quality are
adjusted to ensure that the bit rate is the priority.
Ideal for encoding on a DSL uplink where bit rate limitations are critical.
Ideal for encoding on a 3G uplink where bit rate limitations are critical.
User manual
Configuration | en
2023-08 | V01 | F.01U.393.997
31