Scene Mode Scheduler; Encoder Streams - Bosch DINION 7100i IR NBE-7702-ALX User Manual

DINION 7100i IR
–
–
Backlight compensation
–
–
Intelligent Defog
With the Intelligent Defog mode feature, visibility can be improved significantly when viewing
foggy or other low-contrast scenes.
–
–
–
Contrast enhancement
Use the slider to adjust the contrast enhancement.
Sharpness level
Use the slider to adjust the sharpness level. The zero position of the slider corresponds to the
factory default level.
A low (negative) value makes the picture less sharp. Increasing sharpness brings out more
detail. Extra sharpness can enhance the details of license plates, facial features and the edges
of certain surfaces but will increase bandwidth requirements.
Temporal noise filtering
Adjust the Temporal noise filtering level. The higher the value, the more noise filtering.
Spatial noise filtering
Adjusts the Spatial noise filtering level. The higher the value, the more noise filtering.
4.4.9

Scene Mode Scheduler

The scene mode scheduler is used to determine which scene mode should be used during the
day and which scene mode should be used during the night.
1.
2.
3.
To set the Marked range as the single mode of the device, select the complete time range.
The text "Always" will appear after the Marked range menu.
For more information on the different scene modes, refer to the Scene Mode chapter.
Click Set to apply the changes.
4.4.10

Encoder Streams

When this menu is accessed while the device is recording, the following message appears at
the top of the page: "Recording is currently active. At 'Active profile' the stream profile used
for recording is displayed, and overrules the 'Non-recording profile'."
Bosch Security Systems B.V.
shadows of the scene, not depending on multiple exposures. This results in an improved
dynamic range compared to non-HDR modes with maximum clarity on moving objects as
there is no risk of HDR blending artifacts.
HDR X - Optimized DR - This mode should be used for even greater dynamic range
requirements. It adds another fast exposure on top of the HDR X - Motion optimized
mode combining the benefits from HDR X - Motion optimized and traditional HDR.
HDR X - Extreme DR - Further increases performance to an absolute maximum by adding
another fast exposure on top of the HDR X - Motion optimized mode at an even greater
HDR ratio. This mode combines the benefits from HDR X - Motion optimized and
traditional HDR. Due to the maximum HDR ratio, there is a larger risk of HDR artifacts in
the scene and on moving objects.
Select Off to switch off backlight compensation.
Select On to capture details in high-contrast and extremely bright-dark conditions.
Select Extreme to activate an Intelligent Defog mode with enhanced defog capabilities.
Select Auto to activate the Intelligent Defog feature automatically as needed.
Select Off to disable the feature.
Select the mode you wish to use during the day from Marked range drop-down box.
Select the mode you wish to use during the night from Unmarked range drop-down box.
Use the two slider buttons to set the Time ranges.
User manual
Configuration | en
2023-06 | V02 | F.01U.390.686
31