Factory Default Nat/Route Mode Network Configuration - Fortinet FortiGate FortiGate-60M Installation Manual

Factory default FortiGate configuration settings

Factory default NAT/Route mode network configuration

20
Table 2: FortiGate DHCP Server default configuration
Name internal_dhcp_server
Interface Internal
Default Gateway 192.168.1.99
IP Range 192.168.1.110 – 192.168.1.210
Network Mask 255.255.255.0
Lease Duration 7 days
DNS Server 1 192.168.1.99
When the FortiGate unit is first powered on, it is running in NAT/Route mode and has
the basic network configuration listed in
you to connect to the FortiGate unit web-based manager and establish the
configuration required to connect the FortiGate unit to the network. In
page 20, HTTPS administrative access means you can connect to the web-based
manager using HTTPS protocol through this interface. Ping administrative access
means this interface responds to ping requests.
Table 3: Factory default NAT/Route mode network configuration
Administrator
account
Internal interface
WAN1 interface
WAN2 interface
DMZ interface
Modem interface
01-28008-0111-20050128
Table 3 on page
User name:
Password:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
Getting started
20. This configuration allows
Table 3 on
admin
(none)
192.168.1.99
255.255.255.0
HTTP, HTTPS,
Ping
192.168.100.99
255.255.255.0
Ping
192.168.101.99
255.255.255.0
Ping
10.10.10.1
255.255.255.0
HTTPS, Ping
0.0.0.0
0.0.0.0
Fortinet Inc.