Table of Contents
Advertisement
Getting started
Powering on
FortiGate-60R Installation and Configuration Guide
Power requirements
•
DC input voltage: 12 V
•
DC input current: 3 A
Environmental specifications
•
Operating temperature: 32 to 104°F (0 to 40°C)
•
Storage temperature: -13 to 158°F (-25 to 70°C)
•
Humidity: 5 to 95% non-condensing
To power on the FortiGate-60 unit:
1
Connect the AC adapter to the power connection at the back of the FortiGate-60 unit.
2
Connect the AC adapter to the power cable.
3
Connect the power cable to a power outlet.
The FortiGate-60 unit starts up. The Power and Status lights light.
Table 1: FortiGate-60 LED indicators
LED
Power
Status
Link
(Internal
DMZ
WAN1
WAN2)
100
(Internal
DMZ
WAN1
WAN2)
State
Description
Green
The FortiGate unit is powered on.
Off
The FortiGate unit is powered off.
Red
The FortiGate unit is starting up.
Off
The FortiGate unit is running normally.
Off
The FortiGate unit is powered off.
Green
The correct cable is in use and the connected
equipment has power.
Flashing Green
Network activity at this interface.
Off
No link established.
Green
The interface is connected at 100 Mbps.
Powering on
29
Advertisement
Table of Contents
