Factory Default Nat/Route Mode Network Configuration - Fortinet FortiGate FortiGate-3600 Installation Manual

Getting started

Factory default NAT/Route mode network configuration

FortiGate-3600 Installation Guide
The factory default protection profiles can be used to apply different levels of antivirus
protection, web content filtering, spam filtering, and IPS to the network traffic that is
controlled by firewall policies.
• Factory default NAT/Route mode network configuration
• Factory default Transparent mode network configuration
• Factory default firewall configuration
• Factory default protection profiles
When the FortiGate unit is first powered on, it is running in NAT/Route mode and has
the basic network configuration listed in
connect to the FortiGate unit web-based manager and establish the configuration
required to connect the FortiGate unit to the network. In
administrative access means you can connect to the web-based manager using
HTTPS protocol through this interface. Ping administrative access means this
interface responds to ping requests.
Table 2: Factory default NAT/Route mode network configuration
Administrator
account
Internal interface
External Interface
Port 1
Port 2
Port 3
Port 4
Port 5/HA
01-28005-0027-20041101
Factory default FortiGate configuration settings
Table
User name:
Password:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
2. This configuration allows you to
Table 2, HTTPS
admin
(none)
192.168.1.99
255.255.255.0
HTTPS, Ping
192.168.100.99
255.255.255.0
Ping
0.0.0.0
0.0.0.0
Ping
0.0.0.0
0.0.0.0
Ping
0.0.0.0
0.0.0.0
Ping
0.0.0.0
0.0.0.0
Ping
0.0.0.0
0.0.0.0
Ping
17