Table of Contents
Advertisement
Connecting to the board
Connecting to the FortiMail-5001A board
Using the web-based manager to configure the FortiMail-5001A board
Using the CLI to configure the FortiMail-5001A board
Powering off the FortiMail-5001A board
FortiMail-5001A Hardware Guide
Version 3.0 MR5
http://docs.fortinet.com/
•
Feedback
Use
Table 7
to gather the information you need to customize the settings for the
FortiMail-5001A System.
Table 7: FortiMail-5001A board settings
Admin Administrator Password:
IP:
port1
Netmask:
IP:
port2
Netmask:
Default Gateway IP address:
The default route consists of the name of the interface connected
Default Route
to an external network and the default gateway IP address. The
default route directs all non-local traffic to this interface and to the
external network.
Primary DNS Server:
DNS Servers
Secondary DNS Server:
1 Connect the port1 interface of the FortiMail-5001A board to the same hub or switch as
the computer you will use to configure the FortiMail-5001A board.
2 Configure the management computer to be on the same subnet as the port1 interface
of the FortiMail-5001A board. To do this, change the IP address of the management
computer to 192.168.1.2 and the netmask to 255.255.255.0.
3 To access the FortiMail-5001A web-based manager, start Internet Explorer and browse
to https://192.168.1.99/admin (remember to include "s" in https:// and "/admin" after the
IP address).
4 Type admin in the Name field and select Login.
For more installation and configuration information, see the FortiMail Install Guide and
FortiMail Administration Guide on the documentation CD and on
1 Use the serial cable supplied with your FortiMail-5001A board to connect the
FortiMail-5001A Console port to the management computer serial port.
2 Start a terminal emulation program (HyperTerminal) on the management computer.
Use these settings:
Baud Rate (bps) 9600, Data bits 8, Parity None, Stop bits 1, and Flow Control None.
3 At the Login: prompt, type admin and press Enter twice (no password required).
For more details about how to use the CLI commands, see the FortiMail CLI Reference on
the documentation CD and on
To avoid potential hardware problems or data loss, always shut down the board before
powering down the chassis.
Connecting to the FortiMail-5001A board
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
http://docs.fortinet.com.
http://docs.fortinet.com.
21
Advertisement
Table of Contents
