Connecting the FortiGate unit to your network
Connecting the FortiGate unit to your network
Next steps
42
When you have completed the initial configuration, you can connect the FortiGate unit
between your internal network and the Internet.
There are two 10/100 BaseTX connectors on the FortiGate-50A unit:
•
Internal for connecting to your internal network,
•
External for connecting to an external firewall or router.
To connect the FortiGate unit:
1
Connect the Internal interface to the hub or switch connected to your internal network.
2
Connect the External interface to network segment connected to the external firewall
or router.
3
Connect to the public switch or router provided by your Internet Service Provider.
Figure 11: FortiGate-50A network connections
Internal Network
Hub, Switch
or Router
Internal
FortiGate-50A
You can use the following information to configure FortiGate system time, to register
the FortiGate unit, and to configure antivirus and attack definition updates.
Refer to the FortiGate Administration Guide for complete information on configuring,
monitoring, and maintaining your FortiGate unit.
Management
Computer
PWR
STATUS
INTERNAL
EXTERNAL
A
LINK 100
LINK 100
External
Public Switch
or Router
Internet
01-28008-0017-20050128
Transparent mode installation
Fortinet Inc.