Transparent Mode Default Network Configuration - Fortinet FortiGate FortiGate-3016B Install Manual

Transparent mode default network configuration

Transparent mode default network configuration
26
Table 5: Factory default NAT/Route mode network configuration
Administrative
account
Port 1
Port 2
Ports 3-10
Ports 3-18 (FortiGate-3016B)
Network Settings
In Transparent mode, the FortiGate unit has the default network configuration
listed in Table 6 on page 26.
Table 6: Factory default Transparent mode network configuration
Administrator
account
Management IP
DNS
Administrative access
FortiGate-3016B, FortiGate-3600A and FortiGate-3810A FortiOS 3.0 MR5 Install Guide
User name:
Password:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
Default Gateway (for default route)
Interface connected to external network
(for default route)
Default Route
A default route consists of a default gateway and the
name of the interface connected to the external network
(usually the Internet). The default gateway directs all non-
local traffic to this interface and to the external network.
Primary DNS:
Secondary DNS:
User name:
Password:
IP:
Netmask:
Primary DNS server:
Secondary DNS server:
Port 1
Port 2-10
Ports 2-18 (FortiGate-3016B)
Factory defaults
admin
(none)
192.168.1.99
255.255.255.0
HTTPS, Ping
0.0.0.0
192.168.2.99
Ping
0.0.0.0
0.0.0.0
Ping
192.168.100.1
port 1
65.39.139.53
65.39.139.63
admin
(none)
0.0.0.0
0.0.0.0
65.39.139.53
65.39.139.63
HTTPS, Ping
Ping
01-30005-0343-20071113