Updating Antivirus And Ips Signatures; Updating From The Web-Based Manager - Fortinet FortiGate FortiGate-3016B Install Manual

Fortios 3.0 mr5
Hide thumbs Also See for FortiGate FortiGate-3016B:
Table of Contents

Advertisement

Configuring

Updating antivirus and IPS signatures

1
2
3
FortiGate-3016B, FortiGate-3600A and FortiGate-3810A FortiOS 3.0 MR5 Install Guide
01-30005-0343-20071113
You can configure the FortiGate unit to connect to the FortiGuard Distribution
Network (FDN) to update the antivirus (including grayware), antispam and IPS
attack definitions.
The FDN is a world wide network of FortiGuard Distribution Servers (FDS). When
the FortiGate unit connects to the FDN, it connects to the nearest FDS. To do this,
all FortiGate units are programmed with a list of FDS addresses sorted by nearest
time zone according to the time zone configured for the FortiGate unit.
You can update your antivirus and IPS signatures using the web-based manager
or the CLI. Before you can begin receiving updates, you must register your
FortiGate unit on the Fortinet Customer Service site at
https://support.fortinet.com.
Note: Update AV and IPS signatures on a regular basis. If you do not update AV and IPS
signatures regularly, the FortiGate unit can become vulnerable to new viruses.
After registering your FortiGate unit, verify the FortiGate unit can connect to the
FDN:
Check that the FortiGate unit's system time is correct.
From the web-based manager, select refresh from the Update Center.
If you cannot connect to the FDN, follow the procedure for registering your
FortiGate unit and try again or see

Updating from the web-based manager

After you have registered your FortiGate unit, you can update antivirus and IPS
signatures using the web-based manager. The Update Center enables you to
receive push updates, allow push update to a specific IP address, and schedule
updates for daily, weekly, or hourly intervals.
To update antivirus definitions and IPS signatures
Go to System > Maintenance > FortiGuard Center.
Select the blue arrow for AntiVirus and IPS Downloads to expand the options.
Select Update Now to update the antivirus definitions.
If the connection to the FDN is successful, the web-based manager displays a
message similar to the following:
Your update request has been sent. Your database will
be updated in a few minutes. Please check your update
page for the status of the update.
After a few minutes, if an update is available, the System Update Center page
lists new version information for antivirus definitions. The System Status page
also displays new dates and version numbers for the antivirus definitions.
Messages are recorded to the event log indicating whether the update was
successful or not.
Note: Updating antivirus definitions can cause a very short disruption in traffic currently
being scanned while the FortiGate unit applies the new signature database. Schedule
updates when traffic is light, for example overnight, to minimize any disruption.
"Adding an override server" on page
Next Steps
49.
47

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fortigate-3600aFortigate-3810a

Table of Contents