Special Key Combinations - Videonics MXPro DV User Manual

I E
NPUT FFECTS

Special Key Combinations

Use the following key combinations while working with the Input Effects menu.
Table 7: Input Effects Mode Key Combinations
When you are not working at the Input Effects menu, use the following key
combinations.
Table 8: Main Mode Input Effects Key Combinations
When the Input Effects LED light is lit, Input Effects are enabled. MXProDV applies
the effects according to the parameter values for each effect.
When you use the
MXProDV turns off the LED light. It does not change any effects parameter values,
but it does prevent the current Input Effects from being used. Press
EFFECTS
K C
EY OMBINATION
keys
ARROW
Numeric Keypad
or
INPUT EFFECTS OK
buttons
EFFECTS
+0 (zero)
SHIFT
K C
EY OMBINATION
+ button
SHIFT EFFECTS
+
SHIFT INPUT EFFECTS
SHIFT
again to enable them.
R
ESULT
Moves cursor (or, highlight) between the different Input
Effects.
Directly sets the parameter value for the highlighted
effect.
Exits from Input Effects mode.
Moves the cursor directly to that effect – for example,
press to highlight that effect: press
POSTERIZE
highlight that effect: and so on.
If the selected effect matches the currently highlighted
one on the Input Effects menu, pressing the
ton increments the effect's parameter value by one.
Resets all effects to 0 (off) for the selected channel.
R
ESULT
Increments the parameter value by one for the selected
effect and applies it to the CURRENT source.
Temporarily disables and re-enables Input Effects from
being sent to Program out. See the following paragraph.
+ key combination to disable Input Effects,
INPUT EFFECTS
S K C
PECIAL EY OMBINATIONS
to
MOSAIC
but-
EFFECTS
+
SHIFT INPUT
77