Color Neg; Chromakey; Flip Vertical; Strobe - Videonics MXPro DV User Manual

I E
NPUT FFECTS
C N
OLOR EG
C
HROMAKEY
F V
LIP ERTICAL
S
TROBE
Inverts all colors in the image.
Parameter Values — Zero or one.
0 = Off: 1 = On
1
3
Slows down the picture's video frame rate. Motion appears halting, or
jerky — like that produced by a strobe light. MXProDV automatically dis-
ables all strobe settings during transitions.
Parameter Values — Zero through nine. Zero turns off the effect.
Higher values increase the effect. Setting 1, for example, produces the
look of film: setting 2 makes video look like an old movie. Strobe is dis-
abled during transitions.
Chromakey replaces all occurrences
of a color in an image with a differ-
ent image. In this example, (1) the
block of color in the first image (the
area behind Kong's head) gets
2
replaced with the image of the
Golden Gate Bridge (2). The result-
ing image (3) is Kong superimposed
over the bridge. See Chapter 10,
Chromakey, for complete details.
Flips picture top-to-bottom.
Parameter Values — Zero or one.
0 = Off: 1 = On
C N 81
OLOR EG