Performing The Chromakey; Fine-Tuning Key Colors; Ending Chromakey - Videonics MXPro DV User Manual

C
HROMAKEY
P
ERFORMING THE
When the preview screen shows the desired chromakey results:
Using Freeze and You can apply Input Effects (including Freeze) to the background footage, but not to
Other Input the keyed footage.
Effects
•
•

Fine-Tuning Key Colors

You can fine-tune the chroma key effect so that more or less of the keyed footage gets
keyed. You can separately adjust the range of colors and video brightness that get
keyed.
•
•

Ending Chromakey

When you finish using chroma key, press
C
HROMAKEY
Press . The output monitor shows the chromakey image. Press
PLAY
back to the background source.
You can also dissolve between the background footage and the chromakey footage
using the , rather than pressing
T-BAR
To apply the freeze effect, press
+ .
SHIFT CHROMAKEY
To apply any of the other Input Effects, apply them to the CURRENT source before pressing
. MXProDV ignores effects applied to the NEXT source during chromakey.
CHROMAKEY
To adjust the brightness range, enter
brightness values that get keyed, replacing more of the keyed footage with the
background footage. Use
reducing the portion of the image that gets keyed.
To adjust the color range, enter
that get keyed, replacing more of the keyed footage. Use
decrease the range of key-colors, reducing the portion of the image that gets
keyed.
.
PLAY
either before or after pressing
FREEZE
+
SHIFT UP ARROW
+ to decrease the brightness range,
SHIFT DOWN ARROW
+
SHIFT RIGHT ARROW
CHROMAKEY
P C
ERFORMING THE HROMAKEY
again to cut
PLAY
CHROMAKEY
to increase the range of
to increase the range of colors
+
SHIFT LEFT ARROW
.
125
or
to