Solid-State Drive - HP Pavilion 15 Maintenance And Service Manual

3. Remove the WLAN module (3) by pulling the module away from the slot at an angle.
NOTE:
Reverse this procedure to install the WLAN module.

Solid-state drive

Description
For use only on computer models with model numbers 15-cc1xx and 15-cc6xx:
512-GB, 2280, PCIe, NVMe solid-state drive
256-GB, 2280, PCIe, NVMe solid-state drive
For use on all computer models:
512-GB, 2280 M.2, SATA-3, solid-state drive with TLC
256-GB, 2280 M.2, SATA-3, solid-state drive with TLC
128-GB, 2280 M.2, SATA-3, solid-state drive with TLC
256-GB, 2280 M.2, SATA-3, solid-state drive
128-GB, 2280 M.2, SATA-3, solid-state drive
Before removing the solid-state drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
WLAN modules are designed with a notch to prevent incorrect insertion.
Spare part number
933706-004
933705-005
763008-019
760615-038
759848-018
865902-019
827560-050
Component replacement procedures 43