Please Read This First; Manual Structure; Licenses; Condensation - Sony ZRD-1 Operating Instructions Manual

Please Read This First

Manual Structure

This product includes the following manuals to be used
according to the situation.
Before Using This Unit (ZRD-1/ZRD-2, ZRCT-100/
ZRCT-200)
This includes important safety precautions, specifications,
etc.
Installation Manual
This includes information on installation, initial setup,
equipment adjustment procedures, etc. Refer to this
manual when changing equipment settings or performing
readjustments after installation as well.
Operating Instructions (this document)
This includes information on video input selection, picture
quality adjustment, parts identification, etc. Refer to this
manual when performing general operations.
Service Manual
This is intended for use by service personnel and includes
information on diagnosing malfunctions and instructions
on repair.

Licenses

Refer to the Software License Agreement.

Condensation

If the unit is suddenly taken from a cold to a warm location,
or if ambient temperature suddenly rises, moisture may
form on the outer surface of the unit and/or inside of the
unit. This is known as condensation. If condensation
occurs, turn off the unit and wait until the condensation
clears before operating the unit. Operating the unit while
condensation is present may damage the unit.

Security

SONY WILL NOT BE LIABLE FOR DAMAGES OF
ANY KIND RESULTING FROM A FAILURE TO
IMPLEMENT PROPER SECURITY MEASURES ON
TRANSMISSION DEVICES, UNAVOIDABLE DATA
LEAKS RESULTING FROM TRANSMISSION
SPECIFICATIONS, OR SECURITY PROBLEMS OF
ANY KIND.
Depending on the operating environment, unauthorized
third parties on the network may be able to access the unit.
When connecting the unit to the network, be sure to
confirm that the network is protected securely.

Burn-in

Permanent burn-in may occur if a still image is displayed
for a prolonged period of time. Playing a video with
moving images may reduce the severity of burn-in once it
occurs, but it will not remove the burn-in completely.

Defective pixels

The panel fitted to this unit is manufactured with high
precision technology, giving a functioning pixel ratio of at
least 99.99%. Thus a very small proportion of pixels may
be "stuck," either always off (black), always on (red, green,
or blue), or flashing. In addition, such "stuck" pixels may
appear spontaneously over a long period of use due to the
physical characteristics of the organic light-emitting
diodes.
Such occurrences do not indicate a malfunction.

General Precautions

• Avoid getting the product wet. In the event of accidental
contact with liquids, do not turn on the power, and
contact a service representative.
• If an error or malfunction occurs or if foreign matter
enters the interior of the product, turn off the power and
discontinue use, and contact a service representative.
• Do not subject the front panel of the display units to
damage or shocks.
• Request cleaning and maintenance periodically from a
service representative.
3