Overview; System Configuration Diagram - Sony ZRD-1 Operating Instructions Manual

Overview

You can connect the display units based on the installation location and intended use, convert the video content signals that
are input to the display controller based on the array size, and output the signals onto the display units. 4K2K video can
be controlled via a single display controller. Control of the display units is performed from a computer on which Display
Control Software is installed.
Daisy-chain connections can be configured between display units using a power cord (supplied with the ZRD-2 only) and
a network cable. (For details on the number of display units that can be connected, refer to the Installation Manual.)
Caution
Use the Category 6a cable supplied with the ZRD-2 for the network cable or a commercially available Category 7 cable.
Do not use a commercially available Category 6a cable.
Notes
• Display of 4K2K video requires 72 display units.
• Each display controller is equipped with 12 ports, and each port is capable of controlling up to 6 display units.

System Configuration Diagram

Configuration example of the entire system
Video content transmitters
Matrix
switcher
Control (LAN)
Production monitors
• DisplayPort
Video
connector
processor
• DVI connector
(ZRCT-100
only)
• HDMI
connector
(ZRCT-200
only)
Control (LAN)
Hub
VPN router
Controller PC
(Display Control Software installed)
Display controller
Display controller
4
Array
(display units)