Table of Contents
Advertisement
Purpose of this manual
Related manuals
HKSP-R80
Manual Structure
This manual is the maintenance manual of Routing Switcher Controller HKSP-R80
and Routing Switcher Backup CPU HKSP-R81.
This manual is intended for use by trained system and service engineers, and
describes the information for maintenance and detailed service.
The following manuals are prepared for HKSP-R80/R81.
. . . . . Operation Manual (Supplied with HKSP-R80)
This manual describes the software application and operation of HKSP-R80.
. . . . . Installation Manual (Supplied with HKSP-R80)
This manual describes the information on installing the HKSP-R80/R81.
. . . . . System Setup Manual (Supplied with HKSP-R80)
This manual describes the software initialization and operation confirmation.
. . . . . Protocol Manual (Available on request)
This manual describes the protocol for controlling this board. The manual below is
provided for the protocol that this board can support.
If this manual is required, please contact your local Sony Sales Office/Service
Center.
S-BUS PROTOCOL AND COMMAND SPECIFICATIONS
(S-BUS remote terminal control protocol)
Part No.: 9-977-477-1X
. . . . . "Semiconductor Pin Assignments" CD-ROM (Available on request)
This "Semiconductor Pin Assignments" CD-ROM allows you to search for
semiconductors used in B&P Company equipment.
Semiconductors that cannot be searched for on this CD-ROM are listed in the
service manual for the corresponding unit. The service manual contains a com-
plete list of all semiconductors and their ID Nos., and thus should be used together
with the CD-ROM.
Part number: 9-968-546-XX
3 (E)
Advertisement
Table of Contents
